Optimate 2 Battery Charger

The OptiMate 2 Charger is waterproof and very easy to use: just connect it to the battery and plug it into the nearest power outlet, the rest is fully automatic. With its constant current of 0.8 A, OptiMate 2 automatically charges the battery to its maximum capacity and then activates the OptiMate battery-saving maintenance charging mode to keep the battery 100% charged and ready. At the same time,supplies power to the on-board computer, display and burglar alarm.

Recommended for lead-acid batteries of 12 V type:

• STD: (with removable filler cap)
• AGM sealed: (with glass plate absorbed)
• Sealed GEL: up to 50 Ah. You can also keep larger batteries, although it takes longer to charge them.

Functioning:

• Fully functioningautomatic with full safety features such as reverse polarity protection and spark-free connection: UL and CSA safety standards for automatic battery chargers
• Prolongs charging and battery life by up to 400% thanks to its unique charging method, which provides secure, long-term protection with a proven maintenance charge program that combines uat the recommended fixed voltage with a low desulphating current pulse: this way the performance of the battery is optimized continuously.
• Each hour of long-term maintenance is automatically disconnected from the battery for 30 minutes to avoid the risk of losing electrolytes while monitoring the voltage and provides interactive standby when the battery is spent or needs charging; OptiMate 2 immediately chargesand return to maintenance mode. Check when connecting if the battery can assimilate loads or should be replaced.

Maintenance:

• Perfect for maintenance of batteries stored or used only seasonally. OptiMate 2 will keep the battery charged at 100% when not in use, without overcharging it.
• Plug it in and forget it: OptiMate 2 will do the rest. Global Food: Accept Correiaalternates (AC) from 100 V to 240 V, including generator. Characteristics: Load Amperage: 0.8 A constant current available, from 2 to 14.3V.
• Charge phases: It starts with only 2 V, performs a test to know if the battery assimilates the load or it must be replaced, it supplies a collective load of constant current of 0.8 A to 14.3 V, it goes to the phase of verification for complete the load if necessary, after which it enters long-term maintenance mode ploop with interactive standby supervision.
• Phases of desulfatación: OptiMate 2 is a device of intelligent charge and maintenance of batteries. Intelligent control: multiphase electronic controller for precise current and voltage. Suitable for: Recommended for all types of lead-acid batteries from 12 V up to 75 Ah.